Miele professional A 600 Instrucciones De Manejo página 49

Módulo inyector
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 55
At the end
of a programme
Position the shaft of the instrument in the V-shaped recess in the
supporting rail of the A 502 injector unit.
Align the joint at the functional end of the instrument lengthways in
line with the shaft.
Open the functional end of the instrument.
First take the instrument together with the attached hose adapter
out of the holder.
Then detach the hose adapter from the instrument shaft.
Important. Take care as the hose adapter clamp is very strong.
 The hose adapter must be unscrewed and replaced with a blind
stopper if the holder is not in use. Otherwise the loose end of the
hose adapter will be thrown about by the force of the water and
could cause damage.
en - Areas of application
49
Tabla de contenido
loading

Tabla de contenido