Beta 1885/KF Manual Del Usuario página 24

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
OPERATION MANUAL AND INSTRUCTIONS
ISTRUZIONI PER L'USO
- After the car has been started, keeping the gearshift in "P" or "N" position, QUICKLY press the
automatically start injecting fresh oil, removing the same amount of old oil from the converter. The display will show both the
amount of injected fresh oil and the amount of removed old oil.
When the oil displayed in the old oil sight glass has a colour similar to that of the oil displayed in the fresh oil
sight glass, switch off the car.
- After the oil in the converter has been changed, the station will stop, automatically selecting the following:
STEP 4
Disconnect the fittings of the station, bringing the transmission line back to its original setting, and make sure
that there are no leaks. Move the gearshift to R D N P, to bleed the system. Start the car and move the gearshift
to either P or N; check the oil level.
- To fill up oil, IF NECESSARY, through the probe, press the
will show the following:
- Press
to set the amount of oil to be filled up. Make sure that the probe has been placed on the PRESSURE pipe
correctly, and fit it into the oil level plug in the car; press the
- After the operation has been completed, the station will automatically enable the Printing of the entire process thus performed.
For smooth driving quality to be ensured, it might be necessary to drive 40 – 50 km.
FEEDING OIL
- Connect the station to the power supply mains and press the side switch. The display will show AUTOMATIC
TRANSMISSION. Press the
- Press the
key; the display will show the following:
- Press the
pipe correctly, and fit it into the oil level plug in the car or in the container to be filled up, and press the
will start filling up oil to the required amount.
24
key twice, then press the
keys to set the amount of oil to be filled up. Make sure that the probe has been placed on the PRESSURE
key and place the probe on the PRESSURE pipe. The display
key.
key; the display will show the following:
EN
I
key. The station will
key . The station
Tabla de contenido
loading

Tabla de contenido