Bs Settings - Steren TEL-2490 Manual De Instrucciones

4. MENU

4.2.3 BS settings

The user is able to change the base setting in base settings item, press OK key and use
UP▲ or ▼DOWN key to select this item. Then you can do the following:
• DELETE HANDSET:
base.
1. Press OK key, the first show is DELETE HS.
2. Press OK key to enter, the user will be prompted to enter the PIN code.
3. Input the correct 4-digit PIN code using digit key (default PIN code is 0000).
4. Press UP▲ or ▼DOWN key will scroll the handset names list up and down.
5. Press OK key to confirm. The delete handset will be deleted from the list on registered
handset on the base, and the handset will behave according to the out of range condition.
• DIAL MODE: the user can select to change the dial mode (TONE or PULSE).
• FLASH TIME: the user can select to change the flash time (100ms, 300ms, 600ms and
1000ms).
• MODIFY PIN: this function allows the user to change the pin number of the currently active
base (default PIN code is 0000).
1. Press OK key, then using UP▲ or ▼DOWN key to select MODIFY PIN item.
2. Press OK key to confirm, and the display shows PIN?.
3. Entrer the existing PIN code for the base by using numerical keys, then press OK to
confirm.
4. If the old code is validated, the display shows NEW PIN, enter a new PIN code (4 digits),
press OK to confirm.
5. The display shows REPEAT, input the new PIN code again.
6. Press OK to confirm, the code will be stored and a tone sounded.
• BASE DEFAULT: this function allows the user to restore the base setting to the factory
default.
1. Press OK key, then using UP▲ or ▼DOWN key to select BS DEFAULT item.
2. Press OK key to confirm.
3. The user will be prompted to enter the PIN code, the display shows PIN?, then press
numerical keys to input code (default as 0000).
4. If the PIN code is validated all base settings will be returned to the factory default.
this function allows the user to delete a handset registration from the
21 21