Tabla de contenido
Idiomas disponibles
Idiomas disponibles
en - Areas of application
A 812 and A 813
adapters
28
Installation
Remove a nozzle from the injector manifold of your upper basket or
mobile unit.
Screw the holder in at this position. Tighten the holder with the aid
of an open spanner (width across flats 9).
To increase capacity, you can combine the A 814 holder with the
A 812 or A 813 adapters. Both adapters each have 4 ports. The A 814
holder may be fitted to a maximum of 3 ports. The 4th port must al-
ways be sealed with a blind stopper.
– The A 812 adapter can be used on injector manifolds with silicone
adapters.
– The A 813 adapter is intended for use on injector manifolds with
screw connections.
Follow the fitting instructions in the operating instructions for the
A 812 and A 813 adapters.
Screw the A 814 holders into the ports on the adapters.
Ports that are not in use must be sealed with a blind stopper.
The 4th port must always be sealed with a blind stopper.
Capítulos
Tabla de contenido
