Miele professional WRG 02 Instrucciones De Manejo página 12

Cleaning and Care
Cleaning the tank
From time to time the tank must be opened
and checked for dirt.
^ Start the WRG emptying programme.
^ At the end of the emptying programme
loosen the tension band at the top edge of
the tank with an SW 13 screwdriver.
^ Lift the lid.
^ Use a brush to remove any stubborn dirt.
^ Refit the lid and then start the cleaning
programme.
^ The tank and the filter unit are made of
stainless steel. However water with an iron
content or foreign bodies in the water can
lead to rust deposits especially if the unit is
out of use for some time. In this case clean
the tank and filter unit with a gentle
domestic scouring agent. Rinse thoroughly
with water afterwards.
12
Repairs to machines should only be
undertaken by a suitably qualified service
engineer to ensure safety. Unauthorized
repairs could be dangerous. Please contact
the Service Department in cases of
malfunction.
Service Department needs model, machine
number (N) and part number (TN). This data
is on the data plate.
Components should only be exchanged for
Miele original spare parts. In this case Spare
Parts Department also needs the model,
machine number (N) and part number (TN).
M.-Nr. 07 110 850