Furman PST-8 Manual Del Proprietário página 7

again. Avoid turning the unit back on without first checking the source
of the problem and perhaps changing the AC source.
Protection OK Indicator:
Although the Furman SMP+ circuit assures virtually maintenance-
free protection from transient voltage spikes and surges, nature
has a way of occasionally creating electrical forces that are beyond
the capabilities of any transient voltage surge suppressor device to
absorb without some degree of damage. In the rare instance that
this occurs, the blue "Protection OK" LED indicator will turn off. If this
happens, some level of protection from voltage surges will remain,
but Furman's clamping voltage rating will be compromised. The
unit must be returned to Furman Sound, or an authorized Furman
Service Center for repair.
Mounting
If the Power Station needs to be mounted to the inside panel of a rack
or hung from a wall, a convenient crossed oval cutout is provided on
the unit's bottom panel. A standard No. 6 pan head screw can be
used in the same way a picture is hung from a wall. Simply measure
the centers on the bottom of your Power Station. This will be the
distance from the two mounting holes drilled into your wall, rack or
cabinet surface. Once the screw is fastened flush with the surface,
back it out approximately ½". The screw head should push through
the crossed cutout on the bottom surface of the Power Station. Next,
simply allow the Power Station to move down and seat into the end
of its oval cut-out. Adjust the pan head screw if necessary.