Before Using The Appliance The First Time; Cleaning And Care - Unold 68855 Instrucciones De Uso

BeFOre uSing the appliance the FirSt time

1. Remove all packaging materials from the
appliance and ensure that all parts are com-
plete and undamaged.
2. Wash the removable parts in warm water
with mild dishwashing detergent. Do not
use abrasive cleaners or steel wool. Then
rinse the parts with clear water. Dry all parts
thoroughly.
3. Wipe off the housing with a damp cloth.
4. If the heating elements need to be cleaned,
wipe them off a well wrung-out damp cloth.
Make sure that no water enters the housing.
5. Do not immerse the appliance in water or
other liquids.
6. The first time you use the appliance, it is
possible that there will be some smoke.
This smoke is normal and does not repre-
sent a hazard. However, we recommend pre-
heating the appliance before the first use to
eliminate any residue.
7. Place the appliance on a heat-proof, sturdy
and level surface.
8. Leave sufficient space between the appli-
ance and walls and other flammable objects
such as curtains.
9. Make sure that all switches are set to the
0 position.

cleaning anD care

1. Before cleaning, switch off the appliance (set
all switches to 0) and unplug the power cord
from the power supply.
2. allow the appliance to cool completely.
3. Do not immerse the appliance in water or
other liquids in order to clean it.
4. All removable parts, such as the baking
sheet, grill spit and grate, etc. can be
washed in warm water with mild dishwa-
shing detergent. After washing, rinse the
parts with clear water and dry them tho-
roughly. The removable parts can also be
washed in the dishwasher.
5. In case food ever burns on, you can briefly
soak the part in hot water with mild dishwa-
shing detergent to remove all residue.
26
10. Plug the power cord of the appliance into an
electrical outlet (220-240 V ~ AC).
11. Set the temperature selector switch to
250 °C and switch on the top and bottom
heat by pressing the corresponding swit-
ches. The indicator lamps on the switches
light up.
12. As soon as the desired temperature is
reached, the indicator lamps for the tempe-
rature and function go out. As soon as the
appliance begins heating again, the indica-
tor lamps light up again.
13. Before the first use, we recommend heating
the appliance to the maximum temperature
for about 10 minutes until no more smoke
escapes from the appliance.
14. Open the windows during this pre-heating
time. After pre-heating the appliance there
may already be visible signs of use; howe-
ver, these do no affect the function of the
appliance and do not constitute grounds for
a complaint.
15. Switch the appliance off by setting the tem-
perature and time switches to 0 and allow
the appliance to cool completely.
16. Now your appliance is ready for use.
6. If the heating elements need to be cleaned,
wipe them off a well wrung-out damp cloth.
Make sure that no water enters the housing.
7. To clean the housing, wipe it inside and out-
side with a damp cloth. Make sure that no
water enters the appliance.
8. The interior surfaces of the oven are equip-
ped with an easy-to-clean surface and can
be cleaned with a damp cloth. Wipe off
splashes immediately with a damp cloth.
9. Wipe off the burners using a damp cloth
with mild dishwashing detergent. If food
ever cooks over and burns on, you can use a
pot scrubber to clean the burners.
10. Never use caustic or abrasive cleaners or
steel wool, etc.