TROUBLESHOOTING
Problem
Screen turns on and off
No reception on the
Intercomunicador
No picture display but can
hear sound
Batteries cannot be recharged
No transmission at Camera
Possible Cause – things to do/check
-The AUTO mode is selected on the camera, when there
is no noise detected by the camera it stops transmitting
to save power.
Screen then turns off.
Select the CAMERA MODE on the camera to disable
this function.
- Unit has not been switched on.
- AC/DC adaptor has not been connected.
- Adjust the position of the Camera or Intercom.
- No Battery Power (check LED indicator (16)
- The transmitter may not be transmitting. (either not
powered on or in voice activation mode)
- Wrong Channel
- Check if the LCD on/off switch.
- Low Power (Check the LED indicator)
- AC/DC adaptor has not been connected.
- Non-rechargeable battery has been used.
- Only special designed rechargeable batteries can
be recharged. Please contact your dealer if you have
any queries.
- Unit has not been switched on.
- AC/DC adaptor has not been connected.
- Check if the CAMERA AUTO mode is switched on.