Intended Use; Product Features; Technical Data; Declaration Of Conformity - Bosch GAL 1830 W Professional Manual Original

OBJ_BUCH-2159-003.book Page 7 Monday, August 25, 2014 9:53 AM
 Supervise children. This will ensure
that children do not play with the
charger.
 Cleaning and user maintenance of
the battery charger shall not be
made by children without supervi-
sion.
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
 Only charge inductive Bosch Li-Ion batteries. The bat-
tery voltage must match the battery charging voltage
of the charger. Otherwise there is a danger of fire and ex-
plosion.
 Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
 Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
and only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Do not place metal objects on the charger or between
battery and charger. Metal objects can heat up and lead
to injuries.
 Do not place credit cards or other magnetic data carri-
ers near the charger. Stored data on these data carriers
can be deleted.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.

Intended Use

The charger is intended for recharging inductive Bosch Li-Ion
batteries (18 V). The inductive charging is performed by
means of a contactless charging process using magnetic in-
duction.
Bosch Power Tools

Product Features

The numbering of the product features refers to the illustra-
tion of the battery charger on the graphics page.
1 Inductive battery*
2 Standby indicator (green)
3 Charge status indicator
4 Error indicator (red)
5 Charging platform *Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Battery Charger
Article number
Output voltage (automatic volt-
age detection)
Charging current
Allowable charging temperature
range
Charging time for battery
capacity, approx.
– 2.0 Ah
– 5.0 Ah
Number of battery cells
Weight according to
EPTA-Procedure 01/2003
Protection class

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2006/95/EC,
1999/5/EC including their amendments and complies with
the following standards: EN 60335-1:2012,
EN 60335-2-29:2004 + A2:2010, EN 62311:2008-01,
Draft EN 300 330-1 V1.8.0:2014-06,
Draft EN 300 330-2 V1.6.0:2014-06,
EN 301 489-1 V1.9.2:2011-09,
EN 301 489-3 V1.6.1:2013-08.
14
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 18.08.2014
English | 7
GAL 1830 W
2 607 225 8..
V 18
A 3.0
°C 0 – 45
(80%) 100%
min (35) 45
min (65) 85
5 – 10
kg 0.6
/ II
0560
1 609 92A 0HX | (25.8.14)