ESAB Warrior 400i CC/CV Manual De Instrucciones página 41

GB
Connection instruction
The power source is connected to 440V from factory. If another mains voltage is
required, the cable on the printed circuit board has to be moved and placed on the
correct pin. See picture above. This operation must be carried out by a person who
has the appropriate electrical knowledge.
Change of mains cable
If the mains cable needs to be changed, the earth connection to the bottom plate
must be made in a correct way. See the picture above for the order in which the
washers, nuts and screws are placed.
- 41 -
bu21e © ESAB AB 2013