Connecting To A Computer; Installing The Usb Driver; Using The Gt-001 As An Audio Interface - Boss GT-001 Manual Del Usuario

7

Connecting to a Computer

By connecting the GT-001 to a computer via USB, you can do the following.
• Transmit and receive digital audio signals and MIDI messages between the computer and the GT-001
• Edit and manage patches, and display the Parameter Guide (PDF file) on a computer using the dedicated
software
• Download patches from our dedicated BOSS TONE CENTRAL (http://bosstonecentral.com/) website

Installing the USB driver

You must install the USB driver before connecting to a computer:
Please download the USB driver from the website shown below.
Install this special driver before making a USB connection. For further details, refer to the Readme.htm file
that comes with the download.
& http://www.roland.com/support/
The program you need to use, and the steps you need to take to install the USB driver will differ depending
on your computer setup, so please carefully read and refer to the Readme.htm file that comes with the
download.
Connecting to a computer
Using a commercially available USB cable,
connect the USB port of your computer with
the USB port of the GT-001.
* When the GT-001 is connected to a computer
via USB, power is supplied from the computer.
Therefore, it is unnecessary to connect the AC
adaptor.

Using the GT-001 as an audio interface

Record the sound of the GT-001 on your computer, or have sound from your computer be output from the
GT-001's OUTPUT jacks or PHONES jack.
* For details of the audio signal flow when connected via USB and instructions on how to make settings,
refer to "Parameter Guide" (PDF file).
* Refer to the instruction manual for the software you are using to learn how to switch the input source of
the software.
Making use of the GT-001's dedicated software
Using the dedicated software allows you to do the following:
• Easily download patches from our BOSS TONE CENTRAL (http://bosstonecentral.com/) website
• Edit patch settings
• Name patches
• Organize patches in order and switch them around
• Back up patches and system settings, and return to the backed up settings
• Display the "Parameter Guide" (PDF file) on your computer
The dedicated software can be downloaded from our BOSS TONE CENTRAL (http://bosstonecentral.
com/). For details on how to use the software, refer to the Readme.htm file that comes with the
download.
USB port
11