Features; Charging The Internal Battery Of The Portable Power - Schumacher Electric SJ1 Manual Del Usuario

3. FEATURES

6
5
4
3
2
1
1. USB ports optimized
for Android™ (2)
2. Pressure decrease (–) button
3. Pressure increase (+) button
4. Set pressure button
5. Compressor mode button
6. Flex light
7. Digital display
8. Display LED indicators
9. Converter button
Android™ is a trademark of Google Inc.
Apple is a registered trademark of Apple Inc.
®

4. CHARGING THE INTERNAL BATTERY OF THE PORTABLE POWER

IMPORTANT! CHARGE IMMEDIATELY
AFTER PURCHASE, AFTER EACH
USE AND EVERY 30 DAYS, TO KEEP
THE PORTABLE POWER'S INTERNAL
BATTERY FULLY CHARGED AND
PROLONG BATTERY LIFE.
CHECKING THE LEVEL
OF THE INTERNAL BATTERY
To check the internal battery's charge status,
press the Battery % button.
The Digital Display will show the battery's
percent of charge. Charge the internal
battery if the display shows it is under 100%.
NOTE: The internal battery's percent of
charge is most accurate when the jump
starter has been disconnected from all
devices and charging sources for a few
hours.
19 18 17 16
10. USB button
11. Battery % button
12. Flex light ON/OFF button
13. USB ports optimized for Apple
14. Cables with clamps
15. 110V AC household power outlet
16. Jump starter ON/OFF switch
17. 12V DC power outlet
18. Air compressor hose
19. Adapters
CHARGING THE INTERNAL BATTERY
Charge the internal battery for the
portable power using an extension cord
(not included).
NOTE: Use of an improper extension cord
could result in a risk of fire and electric shock.
1. To charge, flip the AC connector on
the back of the unit DOWN and plug in
an 18 AWG or larger extension cord.
2. Plug the extension cord into a 120VAC
electrical wall outlet.
3. While the jump starter is charging,
the marching dashes
the digital display. When the internal
battery is fully charged, the display
will show a smaller, pulsing " i oo" (for
energy efficiency). Complete charging
may take up to 72 hours.
• 5 •
7
8
9
10
11
12
13
14
15
will show on
(2)
®