Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Motor Cooling
:
Use a dry brush or similar tool to
clean the cooling slots at regular
intervals.
MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C
Storing the Machine
For periods of about 3 months or longer:
:
Remove and clean the saw chain
and guide bar, spray with corrosion
inhibiting oil.
:
Thoroughly clean the machine,
paying special attenton to the
cooling slots.
:
If you use biological chain and bar
lubricant, e.g. STIHL Bioplus,
completely fill the chain oil tank.
:
Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
English / USA
Checking and Replacing
Chain Sprocket
:
Disconnect the plug from the power
supply.
:
Remove the chain sprocket cover,
chain and guide bar.
Replace the chain sprocket:
a
–
after using two chains or sooner
–
if the wear marks (arrow) on the
sprocket are deeper than approx.
0.02 in (0.5 mm) since this would
reduce the life of the chain. Use a
gauge (special accessory) to check
the depth of the wear marks.
It is best to use two chains in
rotation with one sprocket.
Use only original STIHL chain sprockets.
35
Capítulos
Tabla de contenido
