Tabla de contenido
Idiomas disponibles
Idiomas disponibles
The operation of any lawn mower can result in
Oreign objects thrown into the eyes, which can
esuit in severe eye damage. Always wear
_afetyglasses or eye shields while operating
/our lawn mower or performing any adjust-
-nents or repairs. We recommend a wide
¢ision safety mask over the spectacles or
standard safety glasses.
HOW TO USE YOUR LAWN MOWER
ENGINE SPEED CONTROL
The engine speed was set at the factory
_oroptimum performance,
Speed is not
adjustable,
ENGINE ZONE CONTROL
CAUTION:
Federal regulations require
an engine control to be installed on this
lawn mower in order to minimize the risk
of blade contact injury. Do not under any
circumstances
attempt to defeat the
function of the operator control. The blade
turns when the engine is running.
• Your lawn mower is equipped with an
operator presence control bar which
requires the operator to be positioned
behind the lawn mower handle to start and
operate the lawn mower.
TO ADJUST CUTTING HEIGHT
• Raise wheels for low cut and lower wheels
for high cut.
• Adjust cutting height to suit your require-
ments. Medium position is best for most
lawns_
• To change cutting height, squeeze adjuster
lever toward wheel. Move wheel up or down
to suit your requirements. Be sure all wheels
are in the same setting°
NOTE: Adjuster is properly positioned when
plate tab inserts into hole in lever. Also, 9-
position adjusters (if so equipped) allow lever
to be positioned between the plate tabs.
Lower Wheels for High Cut
Plate Tab
Raise Wheels for Low Cut
Lever
TO ATTACH GRASS CATCHER
• Close the flip lidoFlip lid must be closed
while operating lawn mower.
o Lift the rear door on the mower housing and
place the grass catcher frame onto the
formed tabs on the rear door hinge bracket.
o The grass catcher is secured to the lawn
mower housing when the rear door is
lowered onto the grass catcher frame,
CAUTION: Do not run your lawn mower
without clipping deflector or approved grass
catcher in place. Never attempt to operate the
lawn mower with the rear door removed or
propped open.
Hinge
bracket
Formed
tabs
Grass catcher
frame
TO EMPTY GRASS CATCHER
° To remove grass catcher, release operator
presence control bar to stop engine,
o Lift up rear door and remove the grass
catcher by the handle.
NOTE:
Do not drag the bag when emptying;
it will cause unnecessary wear.
7
Tabla de contenido
