Tabla de contenido
Idiomas disponibles
Idiomas disponibles
HOOD ASSEMBLY
To avoid breakage, do not hit glass
with metal, glass, porcelain or other
heavy objects.
1. Secure the Electrical System Plate to
the Blower Support with (3) sheet
metal screws. Fig. 9.
2. Fasten the discharge collar to the
blower support with (2) sheet metal
screws. Be sure the collar does not
extend beyond the blower support
edge. Fig. 10.
3. Install 6" round metal duct, long
enough to reach ducting in ceiling.
Duct tape all connections, making
them secure and air tight. Fig. 10.
4. Attach Support Frame to the Blower
Support and secure with (4) washers
and hex nuts. Make sure the edges
marked "FRONT" align. Fig. 11.
5. Determine distance between the
hood filter and cook top. Follow the
chart to adjust support frame to the
proper length. Secure both halves
together with (4) sheet metal screws.
Fig. 12.
FRONT
FRONT
CEILING
24"
HEIGHT
8 FEET
23-5/8"
9 FEET
SUPPORT
FRAME
ADJUSTMENT
HEX NUT
WASHER
BLOWER
SHEET METAL
SUPPORT
SCREW
FIG. 11
- HOOD DISTANCE ABOVE COOK TOP -
25"
26"
- SUPPORT FRAME LENGTH -
22-5/8"
21-5/8"
N/A
- 9 -
ELECTRICAL
SYSTEM PLATE
SHEET
METAL
SCREWS
HEIGHT
SLOTS
27"
28"
N/A
32-5/8"
31-5/8"
BLOWER
SUPPORT
FIG. 9
6"
ROUND
DUCT
FIG. 10
SUPPORT
FRAME
LENGTH
FIG. 12
29"
30"
30-5/8"
29-5/8"
Tabla de contenido
