Sony MPK-DVF3 Manual De Instrucciones página 10

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Preparation (continued)
4
Attach the supplied battery pack
NP-F330 for the LCD monitor to
the rear shell. Be sure to charge
the battery pack fully before
attaching.
Note
Firmly insert the supplied battery cushion as shown
to prevent the battery pack from coming loose if it
is dropped or otherwise subjected to impact.
About the supplied battery pack NP-F330
What is an "InfoLITHIUM" battery pack?
The "InfoLITHIUM" is a lithium ion battery pack which can exchange data with
compatible electronic equipment about its battery consumption. Sony recommends that
you use the "InfoLITHIUM" battery pack with electronic equipment having the
* The indication may not be accurate depending on the conditions and environment
in which the equipment is used.
"InfoLITHIUM" is a trademark of Sony Corporation.
• To charge the supplied NP-F330 battery pack, prepare AC adapter/charger that can
charge infolithium L type (not supplied).
• You can use also the infolithium L type and NP-F530/F550 AC adapter/charger (not
supplied).
• The recording time of a fully charged NP-F330 battery pack is approximately 6 hours
(continuous recording). The actual recording time may be less, depending on
conditions of use.
About the LCD monitor
• Images do not appear on the LCD screen unless it is fully connected to your
camcorder.
• The remaining time displayed on the LCD screen refers to remaining time of the
camcorder battery time, not the remaining time of the LCD monitor battery.
• The LCD monitor of the marine pack does not correspond with the "InfoLITHIUM"
battery pack.
10
-GB
mark.
The "InfoLITHIUM" battery pack is recyclable. When the battery is
exhausted and can no longer be recharged, cover the metal parts of the
battery with an isolator such as scotch tape and take it to a battery
recycling shop.
Tabla de contenido
loading

Tabla de contenido